Rivet Countersunk Head - BLACK
These black countersunk head computer-case rivets have the best possible surface quality. The paint on these rivets is flexible and therefore the color does not jump off, when the rivet body expands! The world's finest black countersunk head rivets - only here at MDPC-X :-))
Which drill size do I need to remove my old rivets?
Just take a 3 mm (or 1/8") drill for steel and drill vertically into the head of the rivet. I recommend very low drill speed and medium pressure. Be prepared for the moment when the rivet breaks through, so that you don't ram your drill head into your computer case :-))
Where do I get the rivet-tool and how do I set rivets?
You will find a rivet-tool in every home depot for very cheap prices. Just ask the staff for a rivet tool. The process of setting the rivets is one of the most relaxing duties in computer modding. :-) Just open the rivet tool, put the little stick of the rivet into the head of the tool, place the rivet in the case hole, press the arms of the tool together ... bang the stick breaks off and the rivet is happy. To get the stick out of the rivet-tool, just widen the arms of the tool to its maximum and it falls out.
Included in this package:
- 50x black countersunk head rivets for computer cases
